Technical specifications
The TASER 10 VR Controller is a virtual reality controller and can only be used with
virtual reality applications. No components can be used as a weapon or converted into
a weapon. Buttons are used for communicating trigger action and for Bluetooth Low
Energy (BLE) pairing to a compatible virtual reality headset.
Parameter Result
Length 6 in. (152.4 mm)
Height 4 in. (101.6 mm)
Width 2 in. (50.8 mm)
Weight 0.64 lb (0.29 kg)
Trigger type Electronic (binary non-adjustable)
Construction Black and white polymer
LEDs
Pairing LED – Single LED behind the front sight for pairing status
indications
Sidelight LEDs – Single LED on both sides to indicate battery status and
trigger actions
Tracking LED – Eight Infrared LEDs on the controller allow the separate
headset's camera to track the location of the controller within 3D space
Comms 2.4 GHz proprietary Bluetooth channel
Power type Separate 2-cell lithium-ion battery pack (not included)
Battery voltage 7.4 V nominal
Operating
range
32–104 ⁰F (0–40 ⁰C)
Battery
charging
method
Separate docking station
Actual measurements on products may vary due to items outside Axon's control.
Product specifications may change without notice. The actual product may vary from
picture, image, or graphic. Refer to current Axon published product specifications for
specified limits and test conditions. Read the manual and all product literature.
For more information, see current TASER 10 device/product specification sheets,
training materials, product manuals, and website at www.axon.com. Axon Enterprise,
Inc. reserves the right to change or modify this document without notice.
TASER 10 VR Controller User Guide
Axon Enterprise, Inc. 23
To Next Page
Loading...
Need help?
General