EasyManuals Logo

Baxi luna duo-tec MP+ 1.35 User Manual

Baxi luna duo-tec MP+ 1.35
Go to English
100 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #29 background imageLoading...
Page #29 background image
29
USER Section (en)
7221369.01 (1-03/15)
5. BOILER INFORMATION MENU
Press to display the information indicated in the following table. Press to exit.
Description Description
00
SW Diagnostic Code
12
Ion current
01
Heating ow temperature
13
Burner working hours
02
Outdoor temperature (if the outdoor sensor is tted)
14
Zone 1 heating mode
03
External storage tank temperature (tted models)
15
Zone 2 heating mode
04
DHW temperature (tted models)
16
DHW circuit operating mode
05
Water pressure in heating system
17
Boiler operating mode
06
Heating return temperature
18
Solar plant operating mode
07
Flue sensor temperature
19
Manufacturer information
08
Not used
20
Manufacturer information
09
Solar collector temperature
21
Gas energy consumption in HEATING
10
Zone 1 heating ow temperature
22
Gas energy consumption in DHW
11
Zone 2 heating ow temperature
23
Gas energy consumption in HEATING + DHW
Items 21, 22 and 23 are displayed alternatively with the gas energy consumption value expressed in millions, thousands and units
of kWh. e.g.: 21 / 033 / 145 / 827 corresponds to a gas energy consumption in HEATING of 33.145.827 kWh.
6. FILLING THE SYSTEM
Periodically check that the pressure displayed on the pressure gauge is 1 - 1.5 bar, with the system cold. If it is lower, turn the
system lling tap installed by the installer. Open the tap very slowly in order to vent the air.
The boiler is tted with a hydraulic pressure gauge which prevents the boiler from working if there is no water.
If pressure drops occur frequently, have the boiler checked by the AUTHORISED TECHNICAL SERVICE CENTRE.
7. ROUTINE MAINTENANCE INSTRUCTIONS
To keep the boiler efcient and safe, have it checked by the Authorised Service Centre at the end of every operating period.
Careful servicing ensures economical operation of the system.
8. SWITCHING OFF THE BOILER
To turn off the boiler, disconnect the electric power supply using the two-pole switch. In the “Off” operating mode the boiler stays
off but the electrical circuits remain powered and the anti-freeze function remains active.

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Baxi luna duo-tec MP+ 1.35 and is the answer not in the manual?

Baxi luna duo-tec MP+ 1.35 Specifications

General IconGeneral
BrandBaxi
Modelluna duo-tec MP+ 1.35
CategoryBoiler
LanguageEnglish

Related product manuals