102
Buttonhole
Securing the Cord
► pull the cord through the buttonhole until the loop
disappears into the end of it
► pull the ends of the cord through to wrong side of the
fabric
► knot or secure with stitches
Buttonhole Cutter and Block
(optional accessory)
► place the fabric on the wood block
► place the cutter in the center of the buttonhole
► press down on the cutter with your hand or a hammer
Cutting Open the Buttonhole
Seam Ripper
► using the seam ripper, cut from the ends towards the
middle
In order not to cut the ends of short button-
holes by mistake, place a pin at the end of the
buttonhole for additional security.
To Next Page
Loading...
Need help?
General
