74
Buttonholes
Saving Buttonhole
► touch the displayed buttonhole in the Stitch Altering
Area
► touch the «Save» function – the buttonhole is saved in
the Long Term Memory
Recalling Saved Buttonhole
► select the desired buttonhole type
► the length of the buttonhole appears in the «Direct Entry
Length» icon
► «auto» and the length in mm appear on the screen
Changing Saved Buttonhole
► select the desired buttonhole type
► touch the «Direct Entry Length» icon
► alter the length of the saved buttonhole; confirm with
► save buttonhole as described above
► the new buttonhole length overrides the existing one
Deleting Saved Buttonhole
► select desired buttonhole type
► touch the «Direct Entry Length» icon and program a
new length or touch the buttonhole displayed in the
Stitch Altering Area
► touch «Reset» = the saved buttonhole is deleted
► a new buttonhole length can be programmed
In Long-Term Memory
Long-term saving of buttonhole programs is only possible for buttonholes originally
stitched as «auto» length buttonholes.
Button Sew-On Program
Sewing on a 2-Hole Button
► check the distance between the holes by turning the
handwheel and adjust the stitch width if necessary
► hold the threads when starting to sew
► sew on the button
► the sewing computer automatically stops when program
is completed and is immediately ready for the next
button
If the stitch width is reduced too sharply (gray
area), the sewing computer cannot be
started. An animation appears.
► attach foot no. 18
To Next Page
Need help?
General
