17
Preparation
Slide-on Table
The slide-on table increases the sewing surface.
Attaching the Table
► raise the needle and presser foot
► from the left, push table to the right over the free-arm
and push firmly so that it engages over the fixing cam
Removing the Table
► raise needle and presser foot
► press the button down and remove to the left
Seam Guide
► press the release button and insert into the groove
(underside of table) from left or right
► can be moved over the entire table length
Scale
► «0» corresponds to the center needle position
Thread Cutter
on Head Frame
► pull both threads from back to front over the cutter and
down
► threads release automatically as soon as the first stitch
is sewn
at bobbin winder
► after winding bobbin, pull thread in direction of arrow
over thread cutter and down
Remove the slide-on table only when
bobbin cover is closed.
To Next Page
Loading...
Need help?
General
