111
BSR
Opening Setup Program
► press the Setup button
► selection menu appears
► touch «5»
► the screen «Audio Settings» appears
Selecting Sound for BSR in the Setup
Program
► one sound is set as default
► touch the bar with the speaker icon for BSR one time
► if the bar is gray and the speaker is red, the sound for
the beeper is inactive
► if the bar is blue, the sound for the beeper is active
► if the sounds in the Setup Program are generally turned
off (field on left side of screen is gray, speaker is red),
the icon with the speaker of the «BSR» bar is not visible
Selecting Sound for BSR on the «BSR»
Screen
► touch the bar with the speaker icon for BSR one time
► if the bar is gray and the speaker is red, the sound for
the beeper is inactive
► if the bar is blue, the sound for the beeper is active
Beeper (Acoustic Signal) Deactivation/Activation
Generally, the sound selection icon is only
visible if the sounds are turned on in the
Setup Program.
5
To Next Page
Need help?
General
