Have the malfunction corrected
as soon as possible at a spe-
cialist service facility, preferably
an authorized BMW Motorrad
retailer.
ASC intervention
with Automatic Stability Control
(ASC)
OE
ASC warning lamp flashes
rapidly.
The ASC has detected insta-
bility at the rear wheel and has
reduced the torque. The warn-
ing lamp flashes longer than the
ASC intervention lasts. This fea-
ture continues to furnish the rider
with optical feedback confirm-
ing that the system has initiated
active closed-loop intervention
even after the critical situation
has passed.
ASC self-diagnosis not
completed
with Automatic Stability Control
(ASC)
OE
ASC warning lamp flashes
slowly.
Possible cause:
The self-diagnosis routine was
not completed; the ASC function
is not available. The engine must
be running and the motorcycle
must be moved at a speed of at
least 3.1 mph (5 km/h) in order
for ASC self-diagnosis to com-
plete.
Ride off slowly. It must be
noted that the ASC function
is not available until the self-
diagnosis has been completed.
ASC switched off
with Automatic Stability Control
(ASC)
OE
ASC warning lamp lights
up.
Possible cause:
The ASC has been deactivated
by the rider.
Switch ASC on.
ASC error
with Automatic Stability Control
(ASC)
OE
ASC warning lamp lights
up.
Possible cause:
The ASC control unit has de-
tected an error.
It remains possible to continue
riding. It must be noted that
the ASC function is not avail-
able. Observe additional infor-
mation on special situations
which can lead to ASC fault
codes ( 68).
Have the malfunction corrected
as soon as possible at a spe-
3
31
z
Displays
To Next Page
Loading...
Need help?
General
