the ABS function is not avail-
able.
Have the malfunction corrected
as soon as possible at an au-
thorized workshop, preferably
an authorized BMW Motorrad
retailer.
ASC self-diagnosis
with Automatic Stability Control
(ASC)
OE
The self-diagnosis routine
is determining whether
BMW Motorrad ASC is ready for
operation. The self-diagnosis
routine runs automatically when
you switch on the ignition.
Phase 1
Check on system components
monitored by the diagnostic sys-
tem while vehicle is parked.
ASC warning lamp flashes
slowly.
Phase 2
The diagnostic system evaluates
status of monitored system com-
ponents while vehicle is under-
way (at least 3.1 mph [5 km/h]).
ASC warning lamp flashes
slowly.
ASC self-diagnosis
completed
ASC warning lamp goes out.
Watch all warning and indicator
lamps on the display.
An ASC error is indicated follow-
ing completion of the ASC self-
diagnosis routine.
It remains possible to continue
riding. It must be noted that
the ASC function is not avail-
able.
Have the malfunction corrected
as soon as possible at a spe-
cialist service facility, preferably
an authorized BMW Motorrad
retailer.
Breaking in
Engine
While running in the motorcy-
cle, vary the throttle opening
and engine-speed range fre-
quently; avoid driving for long
periods at a constant speed.
Choose curvy, slightly hilly sec-
tions of road if possible.
Observe the engine run-in
speeds.
Engine run-in speed
<5000 min
-1
Observe mileage, after which
the first running-in check
should be performed.
5
58
z
Riding
To Next Page
Loading...
Need help?
General
