BMW 2013 F800GT User Manual

Apply uniform pressure to push
front wheel stand down and
raise motorcycle.
with center stand
OE
If the motorcycle is raised
too far at the front the
center stand will lift clear of the
ground and the motorcycle could
topple to one side.
When raising the motorcycle,
make sure that the center stand
remains on the ground. Adjust
the height of the front wheel
stand if necessary.
Ensure motorcycle is standing
securely.
Rear-wheel stand
Mounting rear-wheel
stands
Make sure ground is level and
firm and park motorcycle.
Use basic stand with rear
wheel adapter. The basic
stand and its accessories
are available through your
authorized BMW Motorrad
retailer.
Set desired height of rear-
wheel stand using bolts 1.
Remove the lock washer 2; to
do so, press the unlock but-
ton 3.
7
87
z Maintenance

BMW 2013 F800GT Specifications

General

Bore x Stroke	82 mm x 75.6 mm
Compression Ratio	12.0:1
Transmission	6-speed
Front Suspension	Telescopic fork, 43 mm
Rear Brakes	Single disc brake, diameter 265 mm, single-piston floating caliper
Power	90 hp (66 kW) @ 8, 000 rpm
Torque	86 Nm at 5, 800 rpm
Rear Suspension	Cast aluminum dual swing arm, central spring strut
Front Brakes	Double disc brake, diameter 320 mm, 4-piston calipers
ABS	BMW Motorrad ABS
Seat Height	800 mm
Curb Weight	213 kg
Fuel Capacity	15 L (4.0 US gal)
Final Drive	Chain