Climate
102
Automatic air conditioning with extended range of features*
1 Temperature, left-hand side of interior
compartment
2 Maximum cooling effect
3 Defrosting and demisting windows
4 Air volume, adjusting manually
5 Switching off automatic air conditioning
6 Switching cooling function on/off manually
7 Temperature, right-hand side of interior
compartment
8 Residual heat utilisation
9 AUTO program
10 Automatic Air Recirculation Control AUC/
recirculated-air mode
11 LED for independent ventilation system
*
12 Rear window heating
13 Air inlet grille for interior temperature sen-
sor, keep unobstructed
The current setting for the air distribution is dis-
played on the control display.
Preferred interior climate
The AUTO program can optimise air distribu-
tion and air volume in virtually any situation, see
AUTO program below. All you need to do is
select an inside temperature which is comforta-
ble for you.
The following sections inform you in detail
about how to adjust the settings.
Most settings are saved for the remote control
currently in use, see also Personal Profile set-
tings on page 27.
AUTO program
The AUTO program takes charge
of setting the air distribution and air
volume to the windscreen and side
windows, to the upper body and to the footwell.
It in addition adapts your temperature require-
ments in the light of ambient seasonal influ-
ences.
The cooling function is switched on automati-
cally in the AUTO program. A condensation
sensor simultaneously regulates the program in
such a way as to avoid or minimise condensa-
tion on the window surfaces.
Intensity of the AUTO program
You can reduce or boost the intensity of the
automatic air conditioning in line with your indi-
vidual requirements.
iDrive concept, see page 14.
1. Press the button.
The start menu is called up.
2. Move the controller to the left to call up
"Climate".
To Next Page
Loading...
Need help?
General
