Destination input
136
Entering destination via postcode
1. Select "City" or "City / Postcode" and press
the controller.
2. Entering postcode:
Select the individual characters and press
the controller each time.
> To enter spaces, if necessary:
Select the symbol and press the con-
troller.
> To delete individual numbers or letters:
Move the controller to the right to select
and press the controller.
> To delete all numbers or letters:
Move the controller to the right to select
and hold down the controller.
3. Select postcode and press the controller.
The name of the appropriate destination is
displayed.
4. Move the highlighted marker to the third
field from the top. Turn the controller until
the destination is selected and press the
controller.
Entering road, house number and
junction
After entering the street, you can add the junc-
tion or house number.
Entering a street and junction
1. Select "Street" or the street displayed and
press the controller.
2. Enter the street.
The street is entered in the same way as the
town/city.
Enter the junction in the same way as the street.
Entering a street without indicating a
town/city
With the Professional navigation system:
You can also enter a street without indicating a
town or city. In this case, all streets are offered
within the country indicated. The respective
town or city is shown after the street name.
If a town or city has already been entered, this
entry can be cancelled. This may be useful in
instances where the desired street cannot be
found in the indicated town or city because it
belongs to a different suburb, for example.
1. Move the highlighted marker to the upper-
most field.
The arrow is selected.
To Next Page
Loading...
Need help?
General
