110 OPERATION
Turn indicators flash twice.
Confirmation tone sounds
twice (if programmed).
Anti-theft alarm is active.
To deactivate the motion
sensor (for example if you are
about to transport the motor-
cycle on a train and the sway-
ing movement of the mov-
ing train could trip the alarm),
press button 1 on the radio-
operated key again during the
activation phase.
Turn indicators flash three
times.
Confirmation tone sounds
three times (if programmed).
Motion sensor has been
deactivated.
Alarm signal
with anti-theft alarm (DWA)
OE
A DWA alarm can be triggered
by:
Motion sensor
Switch-on attempt with an
unauthorised vehicle key.
Disconnection of the DWA
anti-theft alarm from the mo-
torcycle's battery (DWA in-
ternal battery in the anti-theft
alarm provides power - alarm
tone only, the turn indicators
do not flash)
All functions are sustained even
if the internal battery of the
DWA anti-theft alarm system is
flat; the only difference is that
an alarm cannot be triggered
if the system is disconnected
from the motorcycle's battery.
An alarm lasts for approxim-
ately 26 seconds. While an
alarm is in progress an alarm
tone sounds and the turn indic-
ators flash. The type of alarm
tone can be set by an author-
ised BMW Motorrad retailer.
To Next Page
Loading...
General
