112 OPERATION
Adjusting the alarm system
with anti-theft alarm (DWA)
OE
Switch on the ignition ( 78).
Select SETUP ( 94).
Repeatedly short-press
the MENU rocker button at
the top 1 until SETUP DWA is
displayed.
Press the bottom part 2 of
the MENU rocker button
briefly to toggle between
DWA ON 3 and DWA OFF.
The following settings are avail-
able:
DWA ON: The DWA anti-theft
alarm is active and will be
armed automatically when the
ignition is switched off.
DWA OFF: The DWA anti-theft
alarm is deactivated.
Press and hold the top part 1
of the MENU rocker button to
quit SETUP.
SETUP ENTER is displayed.
with Connectivity
OE
Switch on the ignition
( 78).
Navigate to Settings,
Vehicle settings, Alarm
system.
The following adaptation set-
tings are available:
Adapt Warning signal
Switch Tilt sensor on or
off
Switch Arming tone on or
off
Switch Arm automatically
on or off
Possibilities for adjustment
( 112)
Possibilities for adjustment
with anti-theft alarm (DWA)
OE
The alarm system can be adap-
ted to your particular needs in
the following respects by your
authorised BMW Motorrad Re-
tailer:
Confirmation alarm tone after
activation/deactivation of the
anti-theft alarm (DWA) in ad-
dition to visual confirmation
by turn indicators flashing.
Rising and falling or intermit-
tent alarm tone.
To Next Page
Loading...
Need help?
General
