223
Switch off the ignition.
Place the motorcycle on its
stand on firm, even ground.
Removing seat ( 115).
Replace faulty fuse 1.
If fuse defects recur fre-
quently have the electric
circuits checked by a specialist
workshop, preferably an au-
thorised BMW Motorrad dealer.
Main fuse
40 A (Voltage regulator)
Installing seat ( 115).
Replacing fuses
Switch off the ignition.
Removing seat ( 115).
Remove fuse box 1.
ATTENTION
Jumpering of blown fuses
Risk of short-circuit and fire
Never attempt to jumper a
blown fuse.
Always replace a defective
fuse with a new fuse of the
same amperage.
Consult the fuse assignment
diagram and replace blown
fuse 1 or 2.
If fuse defects recur fre-
quently have the electric
circuits checked by a specialist
workshop, preferably an au-
thorised BMW Motorrad dealer.
Fuse box
10 A (Slot 1: instrument
cluster, alarm system (DWA),
ignition lock, diagnostic
socket, coil main relay)
To Next Page
Loading...
Need help?
General
