BMW K 1300 S User Manual

6 Adapter
for holding 1/4" bits and
9x12 mm and 3/8" jointed
adapter
Engine oil
Checking engine oil level
without center stand
OA
Make sure ground is level and
firm and hold motorcycle at op-
erating temperature vertically.
with center stand
OA
Make sure ground is level and
firm and place motorcycle at
operating temperature on its
center stand.
After longer motorcycle im-
mobilization periods, en-
gine oil can collect in the oil pan;
this must be pumped into the oil
tank before the reading is taken.
Here, the engine oil must be at
operating temperature. Checking
the oil level with the engine cold
or after a short trip leads to mis-
interpretations and therefore to
incorrect oil fill quantities.
To ensure that the display of the
engine oil level is correct, only
check the oil level after a longer
trip.
Let the engine run in neutral
for one minute.
Switch off ignition.
Read off the oil level from the
display 1.
Specified level of engine
oil
between MIN and MAX
marking
If oil level is below MIN mark:
Topping up engine oil ( 102).
If the oil level is above the MAX
mark:
Have oil level corrected by
a specialized workshop,
preferably an authorized BMW
Motorrad retailer.
8
101
z Maintenance

BMW K 1300 S Specifications

General

Displacement	1293 cc
Transmission	6-speed
Fuel System	Electronic fuel injection
Front Suspension	BMW Motorrad Duolever
Front Brakes	Dual 320mm discs, 4-piston calipers
Rear Brakes	Single 265mm disc, 2-piston caliper
Engine Type	Liquid-cooled, 4-stroke in-line four-cylinder
Power	175 hp (129 kW) at 9, 250 rpm
Torque	140 Nm at 8, 250 rpm
Fuel Capacity	19 liters
Seat Height	820 mm
Top Speed	Over 200 km/h
Rear Suspension	BMW Motorrad Paralever
Wheelbase	1, 585 mm
Weight	254 kg (wet)