BMW K 1300 S User Manual

taneously pulling the case out-
ward.
Then lift case out of lower
mounting.
Mounting case
Hook case into lower mounting.
Pull black release lever 1 (RE-
LEASE) upwards while simulta-
neously pushing the case into
upper mounting.
Press black release lever (RE-
LEASE) downward.
Check case for secure hold.
Secure hold
If a case wobbles or is difficult
to fit, it has to be adapted to the
gap between the upper and low-
er mounting. The height of the
lower holder for the case can
be changed on the inside of the
case.
Flat tire kit
with flat tire kit
OA
Stowing flat tire kit
Removing seat ( 67).
Remove screws 1 and side
trim.
To protect the side panel
from scratches, lay it on the
seat.
7
96
z Accessories

BMW K 1300 S Specifications

General

Displacement	1293 cc
Transmission	6-speed
Fuel System	Electronic fuel injection
Front Suspension	BMW Motorrad Duolever
Front Brakes	Dual 320mm discs, 4-piston calipers
Rear Brakes	Single 265mm disc, 2-piston caliper
Engine Type	Liquid-cooled, 4-stroke in-line four-cylinder
Power	175 hp (129 kW) at 9, 250 rpm
Torque	140 Nm at 8, 250 rpm
Fuel Capacity	19 liters
Seat Height	820 mm
Top Speed	Over 200 km/h
Rear Suspension	BMW Motorrad Paralever
Wheelbase	1, 585 mm
Weight	254 kg (wet)