BMW K 1300 S User Manual

a Neutral position
b Position with heavy pay-
load
Seat
Removing seat
Make sure ground is level and
firm and park motorcycle.
Turn key in seat lock 1 coun-
terclockwise while pressing
down on the rear of the seat.
Raise the seat at the rear.
If seat is laid on a rough
surface, seat edges can be
damaged.
Lay the seat on the reference
side on a smooth, clean surface,
e.g. on the tank.
Let go of the key and pull the
seat from the retaining bracket
towards the rear.
Installing seat
If too much pressure is ap-
plied in the forward direc-
tion, there is a danger that the
motorcycle will be pushed off its
stand.
4
67
z Operation

BMW K 1300 S Specifications

General

Displacement	1293 cc
Transmission	6-speed
Fuel System	Electronic fuel injection
Front Suspension	BMW Motorrad Duolever
Front Brakes	Dual 320mm discs, 4-piston calipers
Rear Brakes	Single 265mm disc, 2-piston caliper
Engine Type	Liquid-cooled, 4-stroke in-line four-cylinder
Power	175 hp (129 kW) at 9, 250 rpm
Torque	140 Nm at 8, 250 rpm
Fuel Capacity	19 liters
Seat Height	820 mm
Top Speed	Over 200 km/h
Rear Suspension	BMW Motorrad Paralever
Wheelbase	1, 585 mm
Weight	254 kg (wet)