BMW K 1300 S User Manual

ABS self-diagnosis not
completed
ABS warning light flashes.
Possible cause:
The ABS function is not avail-
able, because the self-diagno-
sis has not been completed. To
check the wheel sensors, the
motorcycle must be driven a few
yards.
Ride off slowly. It must be not-
ed that the ABS function is not
available until the self-diagnosis
has been completed.
ABS deactivated
ABS warning light lights up.
Possible cause:
The ABS system has been deac-
tivated by the driver.
Switching on ABS function
( 58).
ABS error
ABS warning light lights up.
Possible cause:
The ABS control unit has detect-
ed an error. The ABS function is
not available.
Continued driving is possible
while taking the failed ABS
function into account. Observe
additional information on situa-
tions which can lead to an ABS
error ( 85).
Have the malfunction corrected
as soon as possible by a spe-
cialized workshop, preferably
an authorized BMW Motorrad
retailer.
ASC warning
indicators
Display
with automatic Stability Con-
trol
OE
ASC warnings are displayed with
the ASC symbol 2 in conjunction
with the general warning light 1.
Additional information on the
BMW Motorrad ASC is provided
from page ( 86); an overview
of the possible warnings is pro-
vided on the following page.
3
34
z Status indicators

BMW K 1300 S Specifications

General

Displacement	1293 cc
Transmission	6-speed
Fuel System	Electronic fuel injection
Front Suspension	BMW Motorrad Duolever
Front Brakes	Dual 320mm discs, 4-piston calipers
Rear Brakes	Single 265mm disc, 2-piston caliper
Engine Type	Liquid-cooled, 4-stroke in-line four-cylinder
Power	175 hp (129 kW) at 9, 250 rpm
Torque	140 Nm at 8, 250 rpm
Fuel Capacity	19 liters
Seat Height	820 mm
Top Speed	Over 200 km/h
Rear Suspension	BMW Motorrad Paralever
Wheelbase	1, 585 mm
Weight	254 kg (wet)