Care products
BMW Motorrad recommends
that you use cleaning and care
products available at your au-
thorized BMW Motorrad retailer.
BMW CareProducts have been
materials tested, laboratory test-
ed, and field tested and provide
optimum care and protection for
the materials used in your motor-
cycle.
The use of unsuitable
cleaning and care products
can damage motorcycle
components.
For cleaning, do not use any sol-
vents such as nitro-thinners, cold
cleaning agents, fuel or similar,
and do not use cleaning agents
that contain alcohol.
Washing your
motorcycle
BMW Motorrad recommends
that you use BMW Insect Re-
mover to soften and wash off
insects and stubborn dirt from
painted parts before washing the
motorcycle.
To prevent stains, do not wash
the motorcycle immediately after
it has been exposed to bright
sunlight and do not wash it in the
sun.
Make sure that the motorcycle
is washed frequently, especially
during the winter months.
To remove road salt, clean the
motorcycle with cold water im-
mediately after every trip.
After washing the motor-
cycle, after driving through
water or in the rain, braking can
be delayed due to damp brake
disks and brake pads.
Brake early until the brakes are
dry or braked until dry.
Warm water intensifies the
effect of salt.
Only use cold water to remove
road salt.
The high pressure of steam
cleaners can damage seals,
the hydraulic brake system, the
electrical system and the seat.
Do not use a steam jet or high-
pressure cleaning equipment.
Cleaning sensitive
motorcycle parts
Plastics
Clean plastic parts with water
and BMW plastic care emulsion.
This includes in particular:
Windshields and wind deflec-
tors
Headlight lens made of plastic
Covering glass of the instru-
ment cluster
9
132
z
Care
To Next Page
Loading...
Need help?
General
