BMW R 1100 S User Manual

37
Maintenance and care
2
Rear brake
e Attention:
Have brake pads replaced be-
fore the minimum permitted
thickness is reached.
L Note:
For your safety, we recommend
having work on the brake
system performed by a specialist
workshop, preferably an
authorised BMW motorcycle
dealer.
• Make sure the ground is level
and firm and lift the motorcycle
onto its side stand
• Visually check brake pad
thickness
Minimum pad thickness:
Make sure that the brake
disc is not visible through
bore 1 in the inner brake
pad.
– If the brake disc is visible
through bore 1 in the inner
brake pad:
Have the brake pads
changed by a specialist
workshop, preferably an
authorised BMW motor-
cycle dealer.
Checking brake pads
1
20S02g7.fm Seite 37 Donnerstag, 24. Juni 2004 8:42 08

BMW R 1100 S Specifications

General

Displacement	1085 cc
Bore x Stroke	99 mm x 70.5 mm
Compression Ratio	10.3:1
Transmission	5-speed
Final Drive	Shaft drive
Fuel System	Electronic fuel injection
Rear Brakes	Single 276 mm disc, 2-piston caliper
Front Tyre	120/70 ZR 17
Rear Tyre	170/60 ZR 17
Wheelbase	1, 478 mm
Fuel Capacity	18 liters
Engine Type	Air/oil-cooled, 4-stroke, flat twin
Power	98 hp @ 7, 500 rpm
Front Suspension	Telelever
Rear Suspension	Paralever
Seat Height	810 mm
Front Brakes	Dual 305 mm discs, 4-piston calipers