BMW R 1100 S User Manual

75
Technical data
3
Engine oil
Brand-name HD oil, API classification SF, SG or SH; the suffixes CD
or CE are permitted; or brand-name HD oil of CCMC classification G4
or G5; the suffix PD2 is permitted.
The viscosity class depends on outside temperatures.
Temperatures above or below the limits quoted for the individ-
ual SAE classifications are permitted for brief periods only.
Special Oils are approved individually by BMW AG and available
from your authorised BMW motorcycle dealer.
All engine oils supplied by BMW are subjected to regular BMW
quality assurance checks.
BMW does not approve the use of any upper-cylinder lubricants
or similar oil additives.
Engine oil capacity
without filter replacement 3.50 l
if filter is renewed 3.75 l
SAE 40
SAE 10 W-X “Special Oils” (X≥40)
SAE 10 W-30
SAE 20
SAE 30
SAE 20 W-50
SAE 15 W-50
SAE 15 W-40
SAE 10 W-40
–30 –20 –10
0
10
30
°C
020 40 60
°F
–20
SAE 5 W-X “Special Oils” (X≥40)
20
80
Fluids and lubricants
20S03g7.fm Seite 75 Donnerstag, 24. Juni 2004 8:56 08

BMW R 1100 S Specifications

General

Displacement	1085 cc
Bore x Stroke	99 mm x 70.5 mm
Compression Ratio	10.3:1
Transmission	5-speed
Final Drive	Shaft drive
Fuel System	Electronic fuel injection
Rear Brakes	Single 276 mm disc, 2-piston caliper
Front Tyre	120/70 ZR 17
Rear Tyre	170/60 ZR 17
Wheelbase	1, 478 mm
Fuel Capacity	18 liters
Engine Type	Air/oil-cooled, 4-stroke, flat twin
Power	98 hp @ 7, 500 rpm
Front Suspension	Telelever
Rear Suspension	Paralever
Seat Height	810 mm
Front Brakes	Dual 305 mm discs, 4-piston calipers