BMW R 1100 S User Manual

2
BMW Service
1
For your own safety, use
spare parts and accessories
that have been approved by
BMW.
If you choose genuine accesso-
ries and spare parts that have
been tested and approved by
BMW, you can be sure that the
appropriate tests have been
carried out to confirm their suit-
ability for use on your motor-
cycle. BMW accepts full liability
for these products.
Note however that BMW is
unable to accept liability for
spare parts and accessories
which it has not approved.
BMW cannot assess every sin-
gle product of outside origin in
order to decide whether it can
be used on or with a BMW vehi-
cle without constituting a safety
hazard.
Nor does an official inspection
certificate or permit (such as
the General Operating Permit)
represent a sufficient guarantee
in all cases, as the scope of
testing may be inadequate.
Genuine BMW spare parts,
BMW accessories and other
products approved by BMW
can be obtained from all author-
ised BMW motorcycle dealers,
together with full advice and
recommendations for their use.
Important safety information
20sbkg7.book Seite 2 Mittwoch, 2. Juni 2004 8:58 08

BMW R 1100 S Specifications

General

Displacement	1085 cc
Bore x Stroke	99 mm x 70.5 mm
Compression Ratio	10.3:1
Transmission	5-speed
Final Drive	Shaft drive
Fuel System	Electronic fuel injection
Rear Brakes	Single 276 mm disc, 2-piston caliper
Front Tyre	120/70 ZR 17
Rear Tyre	170/60 ZR 17
Wheelbase	1, 478 mm
Fuel Capacity	18 liters
Engine Type	Air/oil-cooled, 4-stroke, flat twin
Power	98 hp @ 7, 500 rpm
Front Suspension	Telelever
Rear Suspension	Paralever
Seat Height	810 mm
Front Brakes	Dual 305 mm discs, 4-piston calipers