138
en | B92x/B91x On/Off menu Control Panels
2019.06 | 07 | F.01U.307.371 Bosch Security Systems B.V.
24.2 Part On menu
Use the Part On menu to turn areas Part On. Turning an area Part On
means to turn on only some of the points, and thus part of the system.
For example, your security company might configure your system so
that when you use the Part On function, only the exterior doors and
windows turn on, whereas interior motion sensors do not turn on.
24.2.1 Part On
Turning an area Part On turns on some points, or part of the system, in
the area and provides entry and exit delay. For example, you can turn
on the area and leave through a door (within exit delay time) without
creating an alarm event.
Turning the perimeter on with an exit delay:
1. Open the Main Menu.
2. Press [1] or ENTER to open the On/Off menu.
3. Use NEXT to go to the Part On option, and press ENTER, or simply
press [2].
4. Press [1] or ENTER to open the Part On Delay option. The keypad
shows Part On Dly.
5. To turn off the system, enter your passcode and press ENTER.
24.2.2 Part On Instant
Turning an area Part On turns on some points, or part of the system, in
the area with no entry or exit delay. When the area is Part On Instant,
faulting a Part On point (opening a door for example) creates an alarm
event immediately.
Turning the system Part On without delay:
To Next Page
Loading...
Need help?
General
