184
en | B92x/B91x Settings menu Control Panels
2019.06 | 07 | F.01U.307.371 Bosch Security Systems B.V.
28.2 Date/Time
Your security system must have the correct time and date for scheduled
events to occur at the correct times. Use the Date/Time function to set
both the time and date. The security system uses a 12-hour AM/PM
format or a 24 hour format (select in the Date format menu option).
If your security system is configured for automatic date/time updates,
the update might overwrite your changes.
Setting the date and time:
1. Open the Main Menu.
2. Use NEXT to go to the Settings menu option, and press ENTER, or
simply press [5].
3. Use NEXT to go to the Date/Time menu option, and press ENTER,
or simply press [2].
4. Press [1] or ENTER to set the control panel’s date.
5. Enter your passcode and press ENTER.
6. Enter the new date in the selected format. If you make a mistake,
the ESC key acts as a backspace key. Press ESC to delete the
characters and then enter the new numbers.
7. Press ENTER. The keypad shows Change complete and then
returns to the previous menu.
8. Use NEXT to go to the option to change the time, and press ENTER,
or simply press [2].
9. Enter the new time in the selected format. If you make a mistake,
the ESC key acts as a backspace key. Press ESC to delete the
characters and then enter the new numbers.
To Next Page
Loading...
Need help?
General
