Control Panels B94x/B93x Actions menu | en
75
Bosch Security Systems B.V. 2019.06 | 07 | F.01U.307.371
16.3.4 Notification Test
Use this menu to test the security system’s ability to send personal
notification messages to the destination path designated by your
security company.
Testing notifications:
1. Open the Main Menu.
2. Press Actions to open the menu.
3. Press Test to open the menu.
4. Press Notification Test to open the menu.
5. The keypad shows the first properly configured notification path.
Use /NEXT to go to the desired notification path, and then press
ENTER. The control panel sends a test notification, and then
returns to idle text.
16.4 RPS
Use the RPS menu for connection to Remote Programming Software
(RPS). Your security company uses RPS to configure and service your
security system. RPS is intended for use by professional or licensed
installers only.
16.4.1 Answer
Use the Answer option to answer the phone (pick up the phone line) to
connect to RPS.
Using the Answer menu option to answer an incoming call from RPS:
1. Open the Main Menu.
2. Press Actions to open the menu.
3. Press RPS to open the menu.
To Next Page
Loading...
Need help?
General
