Bosch B8512G User Manual

Control Panels B92x/B91x Settings menu | en
187
Bosch Security Systems B.V. 2019.06 | 07 | F.01U.307.371
Enabling a disabled SKED:
1. With the SKED you wish to enable showing, press ENTER.
2. Press ENTER to continue.
3. Enter the new time in HH:MM format. If you make a mistake the
ESC key acts as a backspace key. Press ESC to delete the
characters and then enter the new numbers.
4. Press ENTER to save the time and choose AM or PM.
5. Press ENTER to select AM, or press NEXT and then ENTER to select
PM. The keypad shows Schedule update complete and then returns
to the previous menu.
6. Press ESC to exit the menu.
Disabling an enabled SKED:
1. With the SKED you wish to enable showing, press ENTER.
2. Press ENTER.to continue disable it. The keypad display indicates
that the SKED is disabled.
3. Press ESC to exit the menu.

Bosch B8512G Specifications

General

Model	B8512G
Category	Control Panel
Power Supply	12 VDC
Series	G Series
Areas	8
PGM Outputs on Board	8
On-board Ethernet	Yes
Wireless Support	Yes
Manufacturer	Bosch
Input Voltage	16.5 VAC
Users	500
Communication Formats	IP, GSM, PSTN
Compatibility	Compatible with Bosch detectors, keypads, and communication modules