Bosch B8512G User Manual

Control Panels B92x/B91x On/Off menu | en
141
Bosch Security Systems B.V. 2019.06 | 07 | F.01U.307.371
24.3 Off menu
You can turn areas off simply by entering your passcode or by using the
Off menu. With either option, you turn off all areas in which you have
authority.
You must enter your personal passcode and enter through a designated
entry door to prevent an instant alarm condition. Opening the door
starts entry delay time and the keypad emits a pulsing “beep” tone to
remind you to turn the system off. Enter your passcode before the entry
delay time expires.
If you enter through the wrong door or fail to turn off (disarm) before
the entry delay time expires, an alarm occurs. If this happens, silence
the alarm (by entering your personal passcode and pressing ENTER)
and call your security company to notify them that you do not have an
emergency situation.
Turning off the security system (disarm) with your passcode:
1. Enter your personal passcode.
2. Press ENTER within 8 sec of entering your passcode. The display
returns to idle text.
24.3.1 Turn Off
You can use the Turn Off menu to turn off all areas in which you have
authority.
Turning off areas:
1. Open the Main Menu.
2. Press [1] or ENTER to open the On/Off menu.

Bosch B8512G Specifications

General

Model	B8512G
Category	Control Panel
Power Supply	12 VDC
Series	G Series
Areas	8
PGM Outputs on Board	8
On-board Ethernet	Yes
Wireless Support	Yes
Manufacturer	Bosch
Input Voltage	16.5 VAC
Users	500
Communication Formats	IP, GSM, PSTN
Compatibility	Compatible with Bosch detectors, keypads, and communication modules

Summary

Points

What is a point?

Controlled points

24-hour points

Alarm events

Fire alarms

Details fire alarm events, their unique tone, and evacuation procedures.

Gas alarms

Describes gas alarm events, their tone, and safety instructions.

B94x Keypad operation overview

B94x/B93x On/Off menu

All On menu

Part On menu

Bypass

Details how to temporarily remove points from the security system.

B94x/B93x Actions menu

Reset

Explains how to reset detection devices like smoke detectors and shock sensors.

Test

Describes how to perform walk tests, send test reports, and review system revisions.

Access menu

B94x/B93x Users menu

Change Passcode

Guides users on changing their personal passcode and password requirements.

Add User

Explains the process of adding new users, including passcodes and authority levels.

B92x/B91x Settings menu

Date/Time