English – 8
Intended Use
In addition to the functions outlined here, changes to
software relating to troubleshooting and functional
modifications may be introduced at any time.
The Bosch eBike chargers are intended exclusively to
charge eBike batteries and must not be used for any
other purpose.
The Bosch eBike chargers depicted here are compati-
ble with Bosch eBike batteries from the new system
generationthe smart system.
Technical data
Charger 2ACharger 4ACharger
Product code BPC3210 BPC3410
Input voltage V~ 100–120 100–120
Frequency Hz 50–60 50–60
Rated voltage of the rechargeable battery V= 36 36
Charging current (max.) A 2 4
Charging time for PowerTube750 ap-
prox.
A)
h 11 6
Charging time for PowerPack400 approx.
A)
h 6 3.5
Operating temperature °F 32to104 32to104
Storage temperature °F 50to104 50to104
Weight, approx. lb 1.2 1.5
Protection rating IP40 IP40
A) You can find the charging times for additional eBike batteries at: www.bosch-ebike.com.
Power cable
Article number 1 270 020 343
Rated voltage – cables V~ 300
Rated voltage – connectors/plug-in connectors V~ 125
Rated current – connectors/plug-in connectors A 10
Material – cables PVC
Safety standard – cables UL 62
Safety standard – connectors/plug-in connectors UL 817
Length, approx. ft 6
With regard to electromagnetic compatibility (EMC), the charger is classified as a table-top device.
0 275 U07 3CX | (21.03.2023) Bosch eBike Systems
To Next Page
Loading...
Need help?
General
