English – 9
Operation
Start-up
Connecting the charger to the mains
(2)
Device socket
(3)
Device connector
u Note the household voltage! The voltage of the
power supply must correspond to the specifica-
tions given on the battery charger nameplate.
Plug the device connector (3) of the power cable into
the device socket (2) on the charger.
Connect the power cable (country-specific) to the
mains.
Use only the supplied input connection: standard AC
power cord ((3) in the diagram) when connecting to
the household electrical supply.
Bosch eBike Systems 0 275 U07 3CX | (21.03.2023)
To Next Page
Loading...
Need help?
General
