Bosch Security Systems User Manual

15
If there are bypassed points,
AREA 1 ## BYPASAREA 1 ## BYPAS
AREA 1 ## BYPASAREA 1 ## BYPAS
AREA 1 ## BYPAS
(## = total number of bypassed points) is
displayed, followed by the point text
descriptions of the bypassed points. These
displays scroll at the rate of 2 seconds each. If
there are no faulted or bypassed points, the
displays do not appear. Instead, the display
shows
NO FAULTS/BYPASNO FAULTS/BYPAS
NO FAULTS/BYPASNO FAULTS/BYPAS
NO FAULTS/BYPAS.
3. The display returns to idle text after scrolling
through the faulted and bypassed point
information. Press
ESCESC
ESCESC
ESC to stop the display from
scrolling.
To manually scroll faulted or bypassedTo manually scroll faulted or bypassed
To manually scroll faulted or bypassedTo manually scroll faulted or bypassed
To manually scroll faulted or bypassed
points:points:
points:points:
points:
1. Ensure the display shows idle text.
2. Press the
NEXT NEXT
NEXT NEXT
NEXT key repeatedly to display the
faulted and bypassed point information. If there
are no faulted or bypassed points the display
shows
NO FAULTS/BYPASNO FAULTS/BYPAS
NO FAULTS/BYPASNO FAULTS/BYPAS
NO FAULTS/BYPAS.
3. Return to idle text at any time by pressing
ESCESC
ESCESC
ESC.
To properly arm the system, all the doors and windows
in the system must be in the normal (not faulted)
condition. Viewing the faulted points helps you find
faulted points and correct them so proper arming is
possible.
The command center offers two ways of displaying
faulted and bypassed point information. The first
causes the faulted or bypassed point information to
scroll automatically through the display. The second
allows you to manually scroll through each individual
point description.
To automatically scroll faulted or bypassedTo automatically scroll faulted or bypassed
To automatically scroll faulted or bypassedTo automatically scroll faulted or bypassed
To automatically scroll faulted or bypassed
points:points:
points:points:
points:
1. Ensure the display shows idle text.
2. Press any number key. If there are faulted points,
AREA 1 ## FAULTAREA 1 ## FAULT
AREA 1 ## FAULTAREA 1 ## FAULT
AREA 1 ## FAULT (## = total number of faulted
points) is displayed first. This display is
followed by the point text descriptions of the
faulted points.
VV
VV
V
ieie
ieie
ie
w Fw F
w Fw F
w F
aultault
aultault
ault
ee
ee
e
d or Bypad or Bypa
d or Bypad or Bypa
d or Bypa
ss
ss
s
sese
sese
se
d Pd P
d Pd P
d P
ointoint
ointoint
oint
ss
ss
s

Bosch Security Systems Specifications

General

Brand	Bosch
Model	Security Systems
Category	Security System
Language	English