To Next Page

To Previous Page

MASMAS

MAS

TER ARM ?TER ARM ?

TER ARM ?

COMMAND 1COMMAND 1

COMMAND 1

urur

n tn t

n t

he Entirhe Entir

he Entir

e Sye Sy

e Sy

em On Wem On W

em On W

itit

DelaysDelays

Delays

DescriptionDescription

Description

Use this function to turn on the entire system, both

perimeter and interior. When you turn the system on,

the display shows how many seconds of exit delay time

remain to exit the protected area. Leave before the exit

delay time expires.

Leaving after exit delay expires causes entry delay to

start. It may also cause an alarm on an interior device.

Enter your personal passcode to disarm the system.

This function can be used by cleaning or service

personnel, or others to turn on the system when they

leave.

Using Master Arm:Using Master Arm:

Using Master Arm:

1. The display shows disarmed idle text.

2. Press the

COMMANDCOMMAND

COMMAND bar. The display shows

SYSTEM COMMANDSYSTEM COMMAND

SYSTEM COMMAND.

3. Press the

1 1

1 key.

Note:Note:

Note: If you prefer, you may use the Command Menu

in place of steps 2 and 3 to initiate this

function. Press the

MENU MENU

MENU key to enter the

Command Menu, then press

NEXT NEXT

NEXT repeatedly

until you reach the

MASTER ARM ?MASTER ARM ?

MASTER ARM ? prompt.

Press

ENTENT

ENT.

MASTER ARM ALL ? MASTER ARM ALL ?

MASTER ARM ALL ? displays.

Press

ENTENT

ENT.

4. The display shows

ARMING ARMING

ARMING for two seconds,

then displays

EXIT NOW #EXIT NOW #

EXIT NOW # (# = exit delay time

remaining). After the exit delay time expires, the

display changes to idle armed text.

5. To disarm the security system, enter your

personal passcode and press

ENTENT

ENT.

Brand	Bosch
Model	Security Systems
Category	Security System
Language	English

Bosch Security Systems User Manual

Table of Contents

Questions and Answers:

Bosch Security Systems Specifications

Related product manuals