55
NO AUTHORITYNO AUTHORITY
NO AUTHORITYNO AUTHORITY
NO AUTHORITY
The system does not recognize the passcode entered.
NOT AUTHORIZEDNOT AUTHORIZED
NOT AUTHORIZEDNOT AUTHORIZED
NOT AUTHORIZED
The passcode entered does not have the authority to
Force Arm.
PERIMETR DELAYPERIMETR DELAY
PERIMETR DELAYPERIMETR DELAY
PERIMETR DELAY
Indicates that the perimeter is armed (turned on)
with entry/exit delay time. (See Turning the System
On With Delays
..
..
.)
PERIMETR INSTANTPERIMETR INSTANT
PERIMETR INSTANTPERIMETR INSTANT
PERIMETR INSTANT
Indicates that the perimeter is armed (turned on)
without entry/exit delay time. (See Turning the
System On Without Delays.)
FIRST DISARMFIRST DISARM
FIRST DISARMFIRST DISARM
FIRST DISARM
Indicates that the function requested can only be
performed when the area is disarmed. Disarm the area
to perform the function.
Standard DisplaysStandard Displays
Standard DisplaysStandard Displays
Standard Displays
The command center uses standard and custom
displays to show the status of the security system.
Many standard displays are described here. The system
may not use all of them. Descriptions of custom text
follow.
SYSTEM COMMANDSYSTEM COMMAND
SYSTEM COMMANDSYSTEM COMMAND
SYSTEM COMMAND
Displays when you press the
COMMAND COMMAND
COMMAND COMMAND
COMMAND bar. The
system is waiting for you to enter a one or two digit
number to complete the command.
DISARM NOWDISARM NOW
DISARM NOWDISARM NOW
DISARM NOW
When the system is turned on, entering through a delay
door starts entry delay time. The command center emits
a tweedle tone and displays
DISARM NOWDISARM NOW
DISARM NOWDISARM NOW
DISARM NOW.
You must turn off the system before entry delay time
expires to avoid creating an alarm event.
EXIT NOWEXIT NOW
EXIT NOWEXIT NOW
EXIT NOW
Arming the system starts exit delay time. The command
center emits a repeating beep tone and displays
EXITEXIT
EXITEXIT
EXIT
NOWNOW
NOWNOW
NOW.
To Next Page
Loading...
Need help?
General
