Bosch Security Systems User Manual

25
6
Arming/DisarmingArming/Disarming
Arming/DisarmingArming/Disarming
Arming/Disarming
TT
TT
T
urur
urur
ur
ning tning t
ning tning t
ning t
he Syhe Sy
he Syhe Sy
he Sy
ss
ss
s
tt
tt
t
em On em On
em On em On
em On
(Ar(Ar
(Ar(Ar
(Ar
ming)ming)
ming)ming)
ming)
The security system can be turned on (armed) in many
different ways, depending on the arming command
used. The basic arming command arms the entire
system. The simplest way to arm the entire system is
to enter your passcode or COMMAND 1.
There are several other arming commands to turn the
system on. These are described later in this guide.
To Arm the Security System:To Arm the Security System:
To Arm the Security System:To Arm the Security System:
To Arm the Security System:
1. Enter your passcode and press
ENTENT
ENTENT
ENT.
2. The command center briefly displays
ARMINGARMING
ARMINGARMING
ARMING,
and the exit delay tone begins. After exit delay
time expires, the display changes to idle armed
text.
TT
TT
T
urur
urur
ur
ning tning t
ning tning t
ning t
he Syhe Sy
he Syhe Sy
he Sy
ss
ss
s
tt
tt
t
em Ofem Of
em Ofem Of
em Of
ff
ff
f
(Disarming)(Disarming)
(Disarming)(Disarming)
(Disarming)
The security system is turned off by entering your
personal passcode. When the system is turned on, you
must enter through a designated entry door to prevent
an instant alarm condition. Opening the door starts
entry delay time and the Command Center emits a
pulsing “beep” tone to remind you to turn the system
off. Enter your passcode before the delay time expires
and the system turns off.
If you enter through the wrong door or fail to disarm
before the entry delay time expires, you cause an alarm.
If this happens, silence the alarm (by entering your
personal passcode and pressing
ENTENT
ENTENT
ENT) and call your
security company to notify them that it is not an
emergency situation.

Bosch Security Systems Specifications

General

Brand	Bosch
Model	Security Systems
Category	Security System
Language	English