Brother BE-438D Service Manual

2. FUNCTION SETTINGS
w
ork c amp sett1ngs
No.
Setting
ranQe
Setting items
Default
Work clamp motions
1
Single pedal
Work clamp is raised automatically.
.
2
Work clamp is raised
by depressing the foot switch.
050
3
Work clamp is raised automatically, then it is lowered by depressing
1
Two pedals
the work clamp switch.
Work
clamp is kept lifted while the work clamp pedal is depressing
4
the work
clamp switch.
Work
clamp ooeration and thread winder operation before home position detection
OFF
Work clamp vertical movement and thread winder operation are not possible
051
before home position detection.
OFF
ON
Work clamp vertical movement and thread winder operation are possible before
home position detection.
s h"
ewmg mac
me motor settings
No.
Setting
range
Setting items
Default
Highest needle position stop
OFF Disable
The motor operates in reverse when the upper shaft stops, to return the needle
150
bar to close to its highest position.
OFF
ON
(When the motor operates in reverse to raise the needle, the thread take-up will
stop at a position which is lower than its normal stopping position. As a result, the
thread take-up
will rise slightly at the sewing start, and this may result in the thread
pulling out under certain conditions.)
Speed for the first stitch at the sewing start [Units x
100 rpm]
151
4-32
ForKE-430D
····.r.:-27····
-FCirEIE~:38ti~--------------------------------------------------------------······--·
S_Qeed for the second stitch at the sewing start [Units x 1 00 rpm]
152
4-32
ForKE-430D
· -- ·.r.:-21 ---- -FCirEIE~:3ati·-·---------------------------------------------------------------------
*4
Speed for the third stitch at the sewing start [Units
x 100 rpm]
153
4-32
ForKE-430D
----.r.:-27·---
-FCirEIE~:3ati·-----------------------------------------------------------------------
Speed for the fourth stitch at the sewing start [Units x 100 _!I>_m]
154
4-32
ForKE-430D
----4-.:-27 ____
-FCirEIE~:3ati·-----------------------------------------------------------------------
Speed for the fifth stitch at the sewing start [Units x 100 rpm]
155
4-32
ForKE-430D
32
----4-~27 ____
-FCirEIE~:3ati·-----------------------------------------------------------------------
------27 ______
Speed for the fifth stitch before the sewing end [Units x 100 rpmJ
156
4-32
ForKE-430D
32
----4-~27 ____
-FCirEiE~:3ati·-----------------------------------------------------------------------
------27·-----
Speed for the fourth stitch before the sewing end [Units x 100 rpm]
157
4-32
ForKE-430D
32
----4-~27 ____
·FCirEiE~:3ati·-----------------------------------------------------------------------
------27·-----
Speed for the third stitch before the sewing end [Units x 100 rpmJ
158
4-32
ForKE-430D
32
----4-~27·---
.FCirEIE~:3ati·-----------------------------------------------------------------------
------27·-----
Speed for the second stitch before the sewing end [Units x 100 rpml
159
4-32
ForKE-430D
27
--·-.r~27 ____
-FCirEIE~:3ati·-----------------------------------------------------------------------
*4 D fa It
e u
h d I tf va ues or eac mo e se mg
No. KE-430D-01, -07
KE-430D-02
BE-438D
151
8
15
4
152
12
20
6
153
32
9
154
32
20
6
KE-4300, BE-4380
From the library of: Superior Sewing Machine & Supply LLC

Brother BE-438D Specifications

General

Brand	Brother
Model	BE-438D
Category	Sewing Machine
Language	English