8.
Applying
grease (When "GREASEUP" appears)
8. Applying grease (When "GREASEUP" appears)
If "GrE" and "AS. UP" flash
on
the PROGRAM
No.
display (1) and the menu display (2) respectively,
and
a buzzer sounds
when the power switch is turned on, it means that grease needs to be
applied. (The sewing machine will not operate at this
time, even
if
the foot switch is depressed.)
Apply grease while referring
to
the following page.
(1)
brother
O!CAUTION
otv
(3)
o9SPEED
-
-
(2)
0 I SPRITNi•
- -
//
~-
•
B!C!J
...
...
STEP
-
888811
4485Q
<To continue
sewing
temporarily
without
applying grease>
1.
Press the RESET key (3).
2.
The PROGRAM No. display (1) and the menu display (2) will change to the normal displays, and sewing can be carried
out by depressing the foot switch.
Note:
• "GrE" and "AS.UP" will continue to be displayed each time the power is tumed on until grease is applied
and
the
notification
is
reset by carrying out the procedure on the following page.
•
If
you continue to use the sewing machine after the "GrE" and "AS. UP" notification appears without applying grease
(or without carrying out the reset procedure),
"E100" will appear after a certain period
of
time and the sewing
machine
will be forcibly prevented from operating for safety reasons.
If
this happens, apply grease and carry out the reset procedure.
*
If
you
continue
to
use
the
sewing machine after carrying
out
the
reset procedure
but
without
applying grease,
problems
with
the
sewing machine
may
result.
KE-430D, BE-438D
81
To Next Page
Loading...
Need help?
General
