5. Options
DIMM
For HL-5240
The HL-5240 printer has 16 MB of standard memory and one slot for optional memory expansion. You can
expand the memory up to 528 MB by installing dual in-line memory modules (DIMMs).
For HL-5250DN
The HL-5250DN printer has 32 MB of standard memory and one slot for optional memory expansion. You
can expand the memory up to 544 MB by installing dual in-line memory modules (DIMMs).
DIMM types
You can install the following DIMMs:
[] 128 MB Buffalo Technology VN133-D128 / VN133-X128
[] 256 MB Buffalo Technology VN 133-D256
[] 512 MB Buffalo Technology VN133-D512
[] 64 MB TechWorks 12165-0004
[] 128 MB TechWorks 12462-0001
[] 256 MB TechWorks 12485-0001
[] 512 MB TechWorks 12475-0001
Note ...................................................................................................................................................................................................................................................................................
• For more information, visit the Buffalo Techonology site at http://www.buffalotech.com.
• For more information, visit the Techworks web site at http://www.techworks.com.
In general, the DIMM must have the following specifications:
Type: 144 pin and 64 bit output
CAS latency: 2
Clock frequency: 100 MHz or more
Capacity: 64, 128, 256 or 512 MB
Height: 31.75 mm (1.25 in.)
Dram Type: SDRAM 2 Bank
SDRAM can be used.
Note ..............................................................................................................................................................................................................................................................................
• There might be some DIMMs that will not work with the printer.
• For more information, call the dealer you bought the printer from or Brother Customer Service.
57
To Next Page
Loading...
Need help?
General
