3. INSTALLATION
22KE-430D, BE-438D
3-15. Starting up
Before starting home position detection, check that the
needle bar is at its highest position.
Turn the machine pulley so that the index mark (1) on the pulley
is inside the mark (2) on the back cover.
Note:
If the machine is started while the index mark (1) is not
inside the mark (2), error code "E110" will be displayed. (At
this time, the error will be cleared if you turn the machine
pulley to set the needle to the needle up stop position.)
1. Turn on the power switch.
The POWER indicator (3) will illuminate, and the model
name will appear in the program No. display (4) and the
specifications will appear in the menu display (5).
Specifications
Ordinary materials [ - 01]
Denim [ - 02]
Knitted materials [ - 07]
Foundation garments [ - 0F]
After this, the program number will flash in the program No.
display (4).
2. Depress the foot switch (6) to the 2nd step.
The feed mechanism will move to the home position and the
work clamp / button clamp will rise.
4420Q
4421Q
4423Q
2nd step
4422Q
To Next Page
Loading...
Need help?
General
