6. USING THE OPERATION PANEL (ADVANCED OPERATIONS)
KE-430D, BE-438D 41
6-5. Using the production counter
<Setting the counter value>
1
TEST indicator and SPEED indicator light
COUNTER indicator flashes
While pressing the TEST key, press the
key.
• The counter value will appear in the PROGRAM No.
display and the menu display as a 7-digit number.
2
Press the
or key to set the counter value.
• The counter value can be set from [000][0000] to
[999][9999].
• If you press the RESET key during setting mode, the
value will become [000][0000].
3
Ending setting mode
TEST indicator switches off
Press the TEST key.
• The counter value will be memorized.
<Production counter operation>
If you press the SELECT key (1) to select the counter display menu when memory switch no. 300 is set to "ON", the SPEED
and COUNTER indicators will illuminate and the production counter will appear in the menu display (2).
1. Each time the sewing of a sin gle article is completed,
the value shown in the menu display (2) is increase by
1.
2. The first three digits will appear in the PROGRAM No.
display (4) while the
key (3) is being pressed, so that
the total number of digits displayed will be 7.
3. If you press the RESET key (5) for 2 seconds or more,
the counter value will be reset to [0000].
Temporary display function
You can display the production counter temporarily while
the lower thread counter is being displayed.
When the SPEED indicator is illuminated, hold down the
TEST key (6) and then press the RESET key (5) to display
the production counter in the menu display (2).
Press the TEST key (6) or the SELECT key (1) to switch the
menu back to the normal menu display.
* Sewing can continue as normal while the temporary
display is active.
4465Q4464Q
4466Q
4468Q
To Next Page
Loading...
Need help?
General
