6. USING THE OPERATION PANEL (ADVANCED OPERATIONS)
48KE-430D, BE-438D
6-8. Direct selection
You can use the function keys to directly select user program numbers and cycle program numbers.
U1 to U4 and C-1 to C-4 can be selected using function keys F1 to F4.
U5 to U10 and C-5 to C-9 can be selected by simultaneously pressing combinations of function keys F1 to F4 (addition).
<Key combination table>
U5 / C-5 U6 / C-6 U7 / C-7
Or
Or
Or
U8 / C-8 U9 / C-9 U10
6-9. Loading additional sewing data
Use a CF card with a memory capacity of 32, 64, 128 or 256 MB.
This product is compatible with CF cards that have been formatted using the FAT16 method. Cards that have been
formatted using the FAT32 method cannot be used.
1
With the power turned off, insert the CF card into the CF
slot.
Note:
• Make sure the CF card is facing the correct way.
• The cover should be closed at all times except when
the CF card is inserted and removed, otherwise dust
may cause trouble.
2
CF media indicator lights
Turn on the power switch.
Press the
or key to select the program number
(200 to 999).
3
While reading
Press the R/W key.
• The buzzer will sound and the selected sewing data
will be loaded from the CF card and copied into the
sewing machine's internal memory.
4
End reading. • The program No. display will change from " P" to the
selected program number.
CF
TM
is a trademark of SanDisk Corporation.
4457Q
4421Q
4453Q
4498Q
To Next Page
Loading...
Need help?
General
