Home > Routine Maintenance > Correct the Paper Feed to Clear Vertical Lines
Correct the Paper Feed to Clear Vertical Lines
Adjust the paper feed to reduce vertical lines.
>> MFC-J4335DW/MFC-J4345DW
>> MFC-J4535DW
MFC-J4335DW/MFC-J4345DW
Before adjusting the print alignment, complete a print quality check first by pressing
(Ink), a or b to select
[Impr. PrintQuality] > [Impr. PrintQuality] again, and then OK.
1. Press (Ink).
2. Press a or b to make your selections:
a. Select [Impr. PrintQuality]. Press OK.
b. Select [Correct Paper Feed]. Press OK.
3. Press c after a confirmation message if a print quality check has been completed appears on the LCD.
4. Select [Auto] or [Manual].
• If you select the [Auto] mode, the paper feed is automatically adjusted by scanning the check sheet.
• If you select the [Manual] mode, you need to input information printed on the check sheet manually.
5. If you selected the [Auto] mode, select the paper size to print the check sheet on.
6. Load specified size paper in the tray, and then press c.
The machine prints the check sheet.
7. Follow the instructions on the LCD.
MFC-J4535DW
Before adjusting the paper feed, make a print quality check first by pressing
[Ink] > [Improve Print
Quality] > [Check Print Quality].
1. Press [Ink] > [Improve Print Quality] > [Correct Paper Feed].
2. Press [Next].
3. Press [Yes] after a confirmation message if a print quality check has been completed appears on the LCD.
4. Press [Auto] or [Manual].
• If you select the [Auto] mode, the paper feed is automatically adjusted by scanning the check sheet.
• If you select the [Manual] mode, you need to input information printed on the check sheet manually.
5. If you selected the [Auto] mode, select the paper size to print the check sheet on.
6. Load specified size paper in the tray, and then press [Start].
The machine prints the check sheet.
7. Follow the instructions on the LCD.
Related Information
• Routine Maintenance
Related Topics:
• Paper Handling and Printing Problems
• Other Problems
552