8
ATTACHING LABELS
LAMINATED TAPE
The enclosed stick enables you to easily remove the backing from labels printed on lami-
nated tapes.
1
Hold the tape in your left hand, with the printed surface facing up, and hold the
stick in your right hand.
2
Pass the tape halfway through the long narrow hole in the stick.
3
Turn the stick three-quarters of a turn towards you and pull the stick away from you
as shown below.
4
Peel off the label backing.
NON-LAMINATED TAPE
Labels printed on non-laminated tapes can be folded in half so that the inside edges of the
two backing pieces come off the label, enabling the backing to easily be peeled off.
GH
ABCDEF
To Next Page
Loading...
Need help?
General