72
NUMBERING FUNCTION
This function can be used to print many copies of the same text while increasing a certain
number in the text by 1 after each label is printed.
To use the Numbering function:
1 Press , , or to position the cursor below the number that
you wish to increase.
2 Hold down and press . The message “NUMBER UNTIL 1–9?” appears
in the display.
3 Press the number key ( to ) of the last number that is to be printed.
☞
To quit the Numbering function without printing, hold down and
press (or press just ).
4 Press (or ) to begin printing the labels. The number of each copy is
displayed while it is being printed.
☞
After printing using the NONE tape magin setting, hold down and
press
once to feed the tape before cutting it, otherwise some of the
printed characters may be cut off.
5 Press down on the tape cutter lever to cut the tape, and then use scissors to cut
along the cutting guide to separate the labels.
EXAMPLE
To print three labels with numbers 1, 2 and 3:
1 Position the cursor below “1”.
Home
End
Code
Number
O
ö
Font
✱
1
æ
M.Del
ò
(
9
To Next Page
Loading...
Need help?
General