71
PRINT KEY & FEED FUNCTION
After you have entered your text and chosen the desired format settings, you are ready to
print.
To print a label:
● Press once. The message “COPIES” followed by the number of the label
being printed is displayed.
☞
After printing using the NONE tape margin setting, hold down and
press once to feed the tape before cutting it, otherwise some of the
printed characters may be cut off.
To feed the tape:
● Hold down and press once. 25 mm of tape is fed out.
To cut the tape:
● Push down on the tape cutter lever.
☞
In order to prevent damaging the tape, do not try to cut it while printing or
feeding. Pushing down on the tape cutter lever too far may break it.
EXAMPLE
To make a label using the NONE tape margin setting:
1 Press once.
2
Hold down and press once.
3 Push down on the tape cutter lever.
Mirror
Print
To Next Page
Loading...
Need help?
General
