To Next Page

To Previous Page

LENGTH FUNCTION

Although the length of the printed label automatically adjusts to fit the length of the

entered text, there may be times when you will want to make a label with a specific

length. The Length function allows you to set the label length between 4.0 and 30.0 cm.

The default length setting is OFF. When the Length function is set to ON, the Length indi-

cator on the right side of the display lights up.

☞

Turning off the machine and turning it on again changes the length setting back to

OFF.

To turn on or off the Length function:

1 While holding down , press once, and keep held down to dis-

play the current length of the label (the text and both margins) briefly, then display

the current label length setting (ON or OFF).

2 While still holding down , continue pressing until the desired label

length setting is displayed.

☞

The Length indicator lights up when ON is selected.

3 Release . If ON was selected, the current label length setting is displayed.

4 Press or to select the desired length or use the number keys to enter the

length.

☞

To change the length in 1.0-cm-steps, hold down either

, and

then release the key when the desired setting is displayed.

5 Press .

Code

Length

Code

Length

Code

Home

End

Home

End

Brother P-Touch 1800 User Manual

Questions and Answers: