5
The Machine
• The machine is a precision machine. Do not drop, hit or otherwise bang the machine.
• Do not lift the machine by the DK Roll compartment cover. The cover could come off and
the machine could fall and become damaged.
• Do not insert any objects into or block the label output slot, USB port, Serial port or LAN
port.
• Use only the interface cable (USB cable) included with the machine.
• When not in use for an extended period, remove the DK Roll from the machine.
• Do not attempt to print labels while the DK Roll cover is open.
CAUTION
Follow these guidelines to avoid fire, electric shock, or other damage.
The Machine
The machine may malfunction if left near a television, radio, etc. Do not use the
machine near any machine that can cause electromagnetic interference.
Ensure that small children do not put their fingers in the moving parts or openings of
the machine.
The electrical outlet should be close to the machine and be easily accessible.
Do not touch the cutter. Personal injury could result.
When the machine is not being used, store it out of the reach of children. In addition,
do not allow children to put machine parts or labels in their mouths. If any object has
been swallowed, seek medical attention.
Do not place the machine in areas exposed to direct sunlight, near heaters or other
hot appliances, or in any area exposed to extremely high or low temperatures, high
humidity or excessive dust. Doing so could cause the machine to malfunction.
Do not hold or lift the machine by the DK Roll cover. The cover could come off and
the machine could fall and become damaged.
Do not hold the machine with only one hand. The machine may slip out of your hand.
Make sure of the correct orientation and procedure when attaching the various cables
and optional products. In addition, use only the specified cables and optional
products. Failure to do so could cause a fire or personal injury. Follow the instructions
in the manual to correctly attach the equipment.
Do not remove the labels (labels indicating operations, product number, etc.) attached
to the machine.
Power Cord
If the machine will not be used for an extended period, remove the power cord from
the electrical outlet.
Cutter
Do not touch the blade of the cutter.
Do not open the top cover when the cutter is operating.
Installation/Storage
Put the machine on a flat, stable surface
such as a desk.
Do not put any heavy objects on top of
the machine.
General Precautions
To Next Page
Loading...
Need help?
General
Weight and Dimensions
