Brother TD-2020A User Manual

Using the Optional Touchpanel Display (Optional:PA-TDU-001) (TD-2125N/2135N/2125NWB/
69
10
1
[ ] (admin key) can be accessed only when touchpanel A (basic control panel) is set.
2
This function is available with firmware version 1.04 or later.
The newest version can be downloaded from the support website.
support.brother.com
NOTE
• Some settings may differ depending on the firmware (printer software).
• If you want to reset the settings, use [Device settings] in the “Printer Setting Tool” to return all
settings to their factory defaults. For more information, see Device Settings on page 27.
Setting the Time and Date 10
Adjust the clock to the current time and date. This time and date is displayed in the main screen.
a Press [ ] (admin key).
b Press [b], select [Setup], and then press [OK].
c Press [b], select [Set Clock], and then press [OK]. The clock setting screen appears.
d Press the number keys to specify the last two digits of the year, two digits for the month and
two digits for the day.
For December 1, 2013, press [1] [3] [1] [2] [0] [1].
(admin
key)
1
(Con-
tinued)
Setup
(Con-
tinued)
Set Temp
Time
2
Default Time/Cont From
Last
When directly entering the date/
time to be printed, select
whether or not the entered date/
time remains set after the copies
are printed.
This setting is applied until the
printer is turned off.
Security Disable Edit On/Off Select whether or not label
layouts can be edited.
Lock
Settings
On/Off Allow or disable setting changes
for [ ] (settings key).
Admin
Password
On/Off
Set password access for [ ]
(admin key).
Enter Password:
**** (4 digits)
Type in the 4-digit password.
Configuration Printer/ProgVer/
FontVer/Memory
Displays the model name,
firmware version, font version
and amount of built-in memory.
Key Parameter Settings Description

Brother TD-2020A Specifications

General

Brand	Brother
Model	TD-2020A
Category	Printer
Language	English