Canon FS10 - Camcorder - 1.07 MP User Manual

Preparations
Preparing the Wireless Controller and
Accessories
First, insert the supplied lithium button
battery CR2025 into the wireless
controller.
1 Press the tab in the direction of
the arrow and pull out the battery
holder.
2 Place the lithium button battery
with
the + side facing up.
3 Insert the battery holder.
22
~ To USE THE WIRELESS CONTROLLER
l~
Point the wireless controller at the
camcorder's remote sensor when
you press
the buttons.
You can rotate the LCD panel 180
degrees
to use the wireless controller
from the front
of the camcorder.
CD NOTES
• The wireless controller may not work
properly when the remote sensor is
situated under strong light sources or
direct sunlight.
• If the wireless controller does not work,
check that [WL.REMOTE] is not set to
[C+D OFF ([IOil] (CO 96). Otherwise,
replace the battery.

Canon FS10 - Camcorder - 1.07 MP Specifications

General

Brand	Canon
Model	FS10 - Camcorder - 1.07 MP
Category	Camcorder
Language	English