6 Press
~UNC.
].
You can press
[FON~J
to
close
the
menu at any time.
Abbreviation
of
Menu
Selections
in
this
Manual
In
this manual, the 0 arrow is used
to
abbreviate menu selections. Below is
an
example
of
changing a setting using
the setup menus.
lFu~g]
0
[I]¥J MENU] 0
[~
DISPLAY SETUP] 0
[LANGUAGE
®]
0
Desired language 0
@N<;J
For selections
in
the FUNC. menu, the
abbreviated form will always
show
the
initial default value.
In
recording mode,
its icon will
appear
on the left side
column
when you first open the menu.
If the setting was changed, the icon
of
the currently selected
option
will
appear
instead.
[FUNC]
[<OFF
IMAGE EFFECT OFF]
Desired image effect 0
[FUN~J
First
Time
Settings
Setting
the
Date
and
Time
You will need
to
set the
date
and
time
of
I
the
camcorder
before you can start
using it. The [DATEITIME] screen will
appear
automatically when
the
camcorder's
clock
is
not
set.
When the [DATEITIME] screen
appears, the year will be displayed
in
orange and indicated with
up/down
arrows.
1 Change
(AT)
the year and move
(~)
to the month.
2 Change the rest of the fields
(month, day, hour and minutes)
in
the same way.
3 Select
(~)
[OK] and press @ to
start the clock and close the setup
screen.
o
IMPORTANT
• When you do not
use
the camcorder for
about 3 months, the built-in
rechargeable lithium battery may
discharge completely and the date and
time setting may
be
lost.
In
such case,
recharge the built-in lithium battery
(I]]
113)
and set the' time zone, date
and time again.
29
To Next Page
Loading...
Need help?
General
