Advanced Printing
21
Printing Photographs Directly from a Canon “Bubble Jet Direct”
compatible digital camera
Let’s take a look at the media types that can be set on the Canon “Bubble Jet Direct”
compatible digital camera connected to this printer and limitations.
Media Types for Digital Camera
When you connect a digital camera, you can use the following media:
Digital Camera Setting Media Type
Card #1 Photo Paper Pro 4"×6" / 101.6×152.4 mm
Card #2 Photo Paper Plus Glossy 4"×6" / 101.6×152.4 mm
Card #3 Photo Paper Plus Glossy 5"×7" / 127.0×177.8 mm
LTR Photo Paper Pro or Photo Paper Plus Glossy Letter
A4 Photo Paper Pro or Photo Paper Plus Glossy A4
Note
z For the digital camera operation method and troubleshooting, refer
to your digital camera manual.
For print error messages, refer to the User’s Guide.
z By operating the digital camera, you can make the following prints:
- You can make a standard print from the image displayed in the
single display mode or in the index display mode.
- You can print specified numbers of images, or make an index print
by editing the DPOF.
- For the images taken with an Exif 2.2-compatible digital camera,
the Photo Optimizer PRO function can be used.
- If date printing is set from the operation panel of the digital
camera, the date when the photograph was taken is to be printed
(excluding the index print).
- Images will be scaled automatically according to the image size
set on the digital camera and the size of the media set on the
printer.
z The digital camera does not support the following functions:
- Print quality setting
-Maintenance
* The print head position cannot be adjusted by operating the
digital camera. Connect the printer to the computer, and then
align the print head position. If the print head position has not
been adjusted, reduce the printing speed (one-way printing) for
better print quality.
z Images other than Exif may not be index printed.
US_i80_QSG.book Page 21 Friday, October 10, 2003 3:25 PM
To Next Page
Loading...
Need help?
General
