Note
• Before borderless printing, make sure the blue Switch on the platen is set toward the ● side. (See
"Setting the Blue Switch on the Platen.") →P.961
4. Select the type of paper. (See "Changing the Type of Paper.") →P.725
Note
• If no barcode has been printed on the roll and you have set ManageRemainRoll to On, specify the
roll length after the type of paper. (See "Specifying the Paper Length.") →P.727
5. Complete settings in the printer driver for the type of paper and other details.
• Specifying Paper in the Printer Driver (Windows) →P.198
• Specifying Paper in the Printer Driver (Mac OS X) →P.479
Basic Printing Workflow
>
Printing procedure
>
iPF6300 Loading and Printing on Rolls
1
5